GENYED EN166 Safety Glasses with Foam Gasket
EN 166 wrap-around safety glasses with a removable foam gasket, anti-fog and scratch-resistant lenses and UV400 — sealed eye protection.
In short:GENYED safety glasses are CE marked to EN 166 on frame and lens, with wrap-around lenses rated against high-speed particles, anti-fog and scratch-resistant coatings, UV400 protection and a removable foam gasket that seals out dust like a goggle. They weigh about 36 g. With the gasket fitted they suit strimming in dry, dusty conditions; without it they're everyday safety glasses. For blade work, wear a visor over them.
You'll be sent to Amazon in your country. Indicative price — live, localised pricing where available. As an Amazon Associate we earn from qualifying purchases.
Pros
- Foam gasket seals out dust and grit like a goggle
- Light enough to forget you're wearing them
- Anti-fog and anti-scratch coatings
Cons
- Not designed to fit over prescription glasses
- Gasket can feel warm in hot weather
- Couldn't be dispatched to us in October 2026
What they are
The product on our link is a pair of GENYED wrap-around safety glasses, CE marked to EN 166 on both frame and lens, with lenses rated against high-speed particles, anti-fog and scratch-resistant coatings, UV400 protection and a removable foam gasket. They weigh about 36 g. When we checked in October 2026, the listing couldn’t be dispatched to our location.
Glasses with a gasket — the best of both
Open safety glasses let fine dust and grit in around the edges; full goggles seal but fog and feel bulky. A foam gasket gives a goggle-like seal against dust in a light glasses frame, and you can remove it on hot days. That suits strimming dry verges, dead growth and gravelly ground.
Reading the EN 166 marking
The frame and lens markings tell you the impact grade: F (45 m/s, low energy), B (120 m/s, medium) or A (190 m/s, high). Spectacle-style frames can only be certified up to F. Check the marking on the pair you receive; our eye protection guide explains the codes.
Wear a visor too
With a metal blade, wear a mesh face shield or clear face shield over your glasses. See the best safety gear for brush cutting.
More safety gear we cover
Light, comfortable 3M Peltor ear defenders with an SNR of 27 dB, rated for noise of 87–98 dB — good value for electric and quieter petrol machines.
- AttenuationSNR 27 dB
- Rated forNoise of about 87–98 dB (3M)
- StandardEN 352-1
High-attenuation 3M Peltor ear defenders — the helmet-mounted H540P3E is rated at 34 dB — for the loudest petrol brush cutters and long, intensive sessions.
- Attenuation34 dB (H540P3E helmet version)
- StandardEN 352
- MountingHelmet clips (headband version also made)
Light 19 g clear polycarbonate safety glasses with anti-fog and anti-scratch coatings and side protection — everyday eye protection for trimming.
- LensClear polycarbonate, rimless with side protection
- CoatingAnti-fog + anti-scratch, both sides
- UVBlocks 99.9% UVA/UVB
Solidur FRMAGF PU and nylon work gloves with foam-padded palms to ease vibration and blisters, a 5 cm cuff and hook-and-loop closure.
- MaterialPU and nylon
- PalmFoam pads (vibration and anti-blister)
- Cuff5 cm, elastic + hook and loop