Oregon Browguard, Ear Defenders & Steel Mesh Visor (Q515061)
Oregon's browguard combo: steel mesh visor (EN 1731) and 25 dB ear defenders (EN 352-1) on a ratchet headband — face and hearing protection in one.
In short:The Oregon Q515061 combines an adjustable browguard with an EasyFit ratchet, ear muffs rated to reduce noise by up to 25 dB (EN 352-1) and a steel mesh visor certified to EN 1731, weighing about 500 g. Safety glasses can be worn under the visor, and the mesh lets air through so it doesn't fog. It suits regular brush cutting and strimming; for very loud petrol machines used all day, consider higher-rated ear defenders.
You'll be sent to Amazon in your country. Indicative price — live, localised pricing where available. As an Amazon Associate we earn from qualifying purchases.
Pros
- Face and hearing protection in one piece
- Mesh never fogs; glasses fit underneath
- Quick ratchet adjustment
Cons
- 25 dB is modest for loud petrol machines
- Fine dust passes through mesh — wear glasses
What it is
Oregon’s Q515061 combines a browguard, ear defenders and a steel mesh visor. The listing gives an EasyFit ratchet for single-point adjustment, ear muffs that reduce noise by up to 25 dB and are certified to EN 352-1, and a mesh visor certified to EN 1731, with room for safety goggles underneath. It weighs about 500 g. It was sold by Amazon when we checked in October 2026.
Why a combo?
With separate visor and ear defenders, one or the other tends to get left behind. A combined unit means both go on together, sit in the right place, and come off together when you stop. The mesh visor stays cool and never fogs, which is why so many users keep it on all session.
What to wear with it
Fine dust and grit pass through mesh, so wear safety glasses underneath — for example the 3M SecureFit 400. For loud petrol brush cutters used for long spells, 25 dB may not be enough; check the sound pressure at the operator’s ear in your manual, and see noise levels and hearing protection.
Alternatives
If you also want head protection, a forestry helmet set adds a hard hat. For a visor only, see the flip-up mesh visor or the clear face shield. Full kit: the best safety gear for brush cutting.
More safety gear we cover
Light, comfortable 3M Peltor ear defenders with an SNR of 27 dB, rated for noise of 87–98 dB — good value for electric and quieter petrol machines.
- AttenuationSNR 27 dB
- Rated forNoise of about 87–98 dB (3M)
- StandardEN 352-1
High-attenuation 3M Peltor ear defenders — the helmet-mounted H540P3E is rated at 34 dB — for the loudest petrol brush cutters and long, intensive sessions.
- Attenuation34 dB (H540P3E helmet version)
- StandardEN 352
- MountingHelmet clips (headband version also made)
Light 19 g clear polycarbonate safety glasses with anti-fog and anti-scratch coatings and side protection — everyday eye protection for trimming.
- LensClear polycarbonate, rimless with side protection
- CoatingAnti-fog + anti-scratch, both sides
- UVBlocks 99.9% UVA/UVB
Solidur FRMAGF PU and nylon work gloves with foam-padded palms to ease vibration and blisters, a 5 cm cuff and hook-and-loop closure.
- MaterialPU and nylon
- PalmFoam pads (vibration and anti-blister)
- Cuff5 cm, elastic + hook and loop