Viabrico Steel Wire Weed Brush Heads, 200 mm (2-pack)
Two 200 mm (8 in) steel-wire weed brush heads with a 25.4 mm bore, for brush cutters — scrub weeds and moss out of paving joints, gravel and hard standing.
In short:The Viabrico pack contains two 200 mm (8 in) rotary steel-wire brush heads with a 25.4 mm (1 in) bore. Each has a two-layer stainless steel disc holding 0.5 mm wire. Fitted to a straight-shaft brush cutter in place of a blade, it scrubs weeds and moss out of paving joints, gravel and hard standing without chemicals. Wire bristles can break off and fly, so wear full face, eye and leg protection and keep bystanders well back.
You'll be sent to Amazon in your country. Indicative price — live, localised pricing where available. As an Amazon Associate we earn from qualifying purchases.
Pros
- Clears weeds and moss from paving without chemicals
- Fits brush cutters with a 25.4 mm arbor like a blade
- Two heads in the pack
Cons
- Throws wire fragments, grit and moss — full PPE essential
- Wears quickly on rough concrete
- Couldn't be dispatched to us in October 2026
What it is
A pack of two rotary weed brushes from Viabrico: 200 mm (8 in) across with a 25.4 mm (1 in) bore, made of a two-layer stainless steel disc holding 0.5 mm wire. They fit in place of a blade on straight-shaft brush cutters with a 25.4 mm arbor, using the normal washer and nut. When we checked in October 2026, the listing couldn’t be dispatched to our location.
What it’s for
A wire brush head is for hard surfaces: it scrubs weeds and moss out of paving joints, block paving, gravel and hard standing — jobs a line or blade can’t do without damage. It’s a chemical-free alternative to weedkiller on drives and patios.
Safety
Wire brushes throw a lot: grit, moss, dirt and broken bristles. Wear a full visor over safety glasses, long trousers, boots and gloves, and keep everyone — and cars and windows — well away. Use the guard specified for metal tools, hold the head flat and use light pressure, and check the brush for loose or broken wires before each use.
Will it fit?
It needs a brush cutter rated for a metal cutting tool and a 25.4 mm arbor; machines with a 20 mm arbor need a reducer ring. How to fit a metal tool is covered in how to fit a brush cutter blade. Other heads are compared in the best brush cutter heads.
More heads we cover
A cheap pattern bump-feed head replacing the Echo Speed-Feed 400 on the SRM-210, SRM-225 and SRM-230 — tap-to-feed, no special tools.
- TypeBump feed (tap to release line)
- ReplacesEcho Speed-Feed 400
- Listed forEcho SRM-210, SRM-225, SRM-230
Husqvarna's T25 tap-and-go trimmer head with a 10 mm left-hand thread — the standard head on many Husqvarna straight-shaft trimmers.
- TypeTap-and-go (bump feed), twin line
- Arbor10 mm, left-hand thread
- ShaftStraight-shaft machines
Husqvarna's T35 semi-automatic (tap) trimmer head for 2.4–2.7 mm line — a tougher head for mid-size petrol brush cutters on rough grass.
- TypeSemi-automatic (tap) head
- Line size2.4–2.7 mm
- Part number578 44 63-01
A twin-line tap-feed trimmer head with an M10 × 1.25 left-hand thread, pre-loaded with 4 m of 2.4 mm line and cutting up to 30 cm — for petrol brush cutters.
- TypeTwin-line tap (bump) feed head
- ThreadM10 × 1.25 left-hand
- Line supplied4 m of 2.4 mm, pre-loaded