Oregon Boltless Tap & Go Head 109 mm
Oregon's boltless tap-and-go universal head (109 mm) for strimmers over 33 cc — takes up to 2.4 mm line, with brass eyelets, supplied with Duoline.
In short:The Oregon Boltless Tap and Go head is a 109 mm universal bump-feed trimmer head for petrol strimmers and brush cutters over 33 cc. You twist it to load line without tools or disassembly, it takes line up to 2.4 mm in various shapes, it has wear-resistant brass eyelets, and it comes loaded with Oregon Duoline. Check your machine's engine size and arbor thread against the adaptors before buying; despite this page's address, it is a tap-feed head, not a fixed-line one.
You'll be sent to Amazon in your country. Indicative price — live, localised pricing where available. As an Amazon Associate we earn from qualifying purchases.
Pros
- Loads line without tools or taking the head apart
- Brass eyelets last far longer than plastic
- Fits many brands' machines
Cons
- Meant for machines over 33 cc
- Max 2.4 mm line
- Not a fixed-line head, despite this page's address
What it is
Oregon’s Boltless Tap and Go head is a 109 mm universal bump-feed head for strimmers and brush cutters over 33 cc. The listing describes twist-to-load line replacement with no tools or disassembly, line up to 2.4 mm in various shapes, wear-resistant brass eyelets, and supply with Oregon Duoline already loaded. It was sold by Amazon when we checked in October 2026. (This page’s address says “fixed line”; the product is a tap-feed head.)
How it works
Like any bump-feed head, tap it lightly on the ground at full throttle to release more line. The boltless design means refilling is quick: line it up, push the line through and twist to wind it in — no unscrewing the cap or winding a spool by hand.
Will it fit?
Oregon says it fits most strimmers and brush cutters above 33 cc from brands including Husqvarna, Stihl, Shindaiwa and Echo. Check the arbor thread on your gearbox against the adaptors supplied, and that your machine is rated for 2.4 mm line. For smaller trimmers, a lighter head such as the Husqvarna T25 is a better match.
Compare
Other heads — fixed-line, quick-load and tap-feed — are compared in the best brush cutter heads. If line won’t feed, see line won’t feed.
More heads we cover
A cheap pattern bump-feed head replacing the Echo Speed-Feed 400 on the SRM-210, SRM-225 and SRM-230 — tap-to-feed, no special tools.
- TypeBump feed (tap to release line)
- ReplacesEcho Speed-Feed 400
- Listed forEcho SRM-210, SRM-225, SRM-230
Husqvarna's T25 tap-and-go trimmer head with a 10 mm left-hand thread — the standard head on many Husqvarna straight-shaft trimmers.
- TypeTap-and-go (bump feed), twin line
- Arbor10 mm, left-hand thread
- ShaftStraight-shaft machines
Husqvarna's T35 semi-automatic (tap) trimmer head for 2.4–2.7 mm line — a tougher head for mid-size petrol brush cutters on rough grass.
- TypeSemi-automatic (tap) head
- Line size2.4–2.7 mm
- Part number578 44 63-01
A twin-line tap-feed trimmer head with an M10 × 1.25 left-hand thread, pre-loaded with 4 m of 2.4 mm line and cutting up to 30 cm — for petrol brush cutters.
- TypeTwin-line tap (bump) feed head
- ThreadM10 × 1.25 left-hand
- Line supplied4 m of 2.4 mm, pre-loaded